Product Description
Product Description
Product Parameters
Company Profile
Packaging & Shipping
Application: | Motor, Electric Cars, Machinery, Marine, Toy, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Bevel Gear |
Step: | Stepless |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-05-16
Best China manufacturer & factory S in Tashkent Uzbekistan series worm gear right angle gearbox for agricultural machinery With high quality best price
More importantly, we make special parts according to supplied drawings/saDue to these features, typical worm gear applications include presses, small engines, lifts and elevators, rolling mills, conveying engineering, mining industry machines, on rudders, and worm drive saws.mples and warmly welcome OEM inquiries.
Overview
Quick Details
- Applicable Industries:
-
Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms, Energy & Mining, Construction works
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Gearing Arrangement:
-
worm
- Output Torque:
-
100~62800N.m
- Input Speed:
-
1450/960rpm
- Output Speed:
-
14-280rpm
- Ratio:
-
7.5~100
- Certification:
-
ISO9001-2008
- Our company has solid economic strength, builds up a technician team contingent with high quality, possesses the production assembly line of technicalization in China and perfect system checking on product quality and runs marketing networks throughout the country. Mount Position:
-
Foot Mounted
- Bearing:
-
LYC,ZWZ
Supply Ability
- Supply Ability:
- 3000 Unit/Units per Month
Packaging & Delivery
- Packaging Details
- Wooden boxes , Cantons packed in 1 pallet
- Port
- Ningbo Port, Shanghai Port
Online Customization
S seriesr right angle gearbox helical worm gear reducer gearbox equivalent s series gear motor worm bucket elevator
Product DesThe lemon tube is suitable for transmissible power of 16-35HP, it is the preferred choice for high speeds and low torque transmission. The two-lobe lemon tube grants low vibrations up to 2600 rpm with lengths not exceeding 800mm. AC series with six-lobe tubes (star)cription
S series is one kind of Helical worm gearbox ,designed as Modularization and high-stainless cast iron case . It is combination of helical gear and worm gear ,which with higher efficiency and strength than simple aluminum worm gearbox . Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements. The gear ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications
Specifications:
1) Output speed: 0.6~1,028r/min
2) Output torque: up to 4530N.m
3) Motor power: 0.12~22kW
4) Mounted form: foot-mounted and flange-mounted mounting
Product Name |
Helical worm gear motor S series gear reducer reduction gearbox |
Gear Material |
20CrMnTi |
Case Material |
HT250 |
Shaft Material |
20CrMnTi |
Gear Processing |
Grinding finish by HOFLER Grinding Machines |
Color |
Customized |
Noise Test |
Bellow 65dB |
Machining precision of gears |
accurate grinding, 6 Grade |
Heat treatment |
tempering, cementiting, quenching,etc. |
Brand of bearings |
C&U ,HRB,LYC,ZWZ.SKF,NSK |
Brand of oil seal |
NAK or other brand |
Noise (MAX) |
65~70dB |
Temp. rise (MAX) |
40 C |
Temp. rise (Oil)(MAX) |
50 C |
Company Information
Certifications
Our Services
Packaging & Shipping
Related Products
FAQ
: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Contact us
Best China manufacturer & factory china manufacturer agricultural machinery made in china poly doffer assembly AN 274760 for JD cotton picker With high quality best price
Due to our wide product range and rich experiences in this industry, we are confident to provide our customers flexible and diversified services.
Overview
Quick Details
- Warranty:
-
1.5 years
- Applicable Industries:
-
farms
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
canada, turkey, None
- Showroom Location:
-
Egypt
- Video outgoing-inspection:
-
Provided
- Machinery Test Report:
-
Provided
- Marketing Type:
-
New Product 2020
- Warranty of core components:
-
1.5 years
- Core Components:
-
Gearbox, GEAR
- Key Selling Points:
-
long service life
- Product Name:
-
cotton picker spindle assembly
- Application:
-
Harverster Machine
- MOQ:
-
1
- Delivery time:
-
15DAYS
- material:
-
stainless steel and PV
- type:
-
18 doffers and 20 doffers
- Other Country:
-
JiangSu
Supply Ability
- Supply Ability:
- 200 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- farm tractor spare parts Doffer Assembly Fits For John Deere -18 doffers
- Port
- Shanghai/Ninbo
-
Lead Time
: -
Quantity(Bags) 1 – 202 The EPG GROUP range of PTO shafts accessories includes various types of yokes for the connection of the tractor power take-off with recessed push button and/or ball collar and/or ball collar for constant velocity joints, with the following spline dimensions: 1”3/8 Z6 – 1”3/8 Z6 -1”3/8 Z21- 1”3/4 Z6- 1”3/4 Z20
>202 Est. Time(days) 25 To be negotiated
Online Customization
Product Description
Product Name |
Doffer Assembly 18 doffer for cotton picker machine |
Model No.Under the guidance of managerial sense of “Serving agriculture, scoring a success through quality of products and honesty in business”, our products have been trusted by clients and have gained a larger share of marketWorm Gear reducers are utilized in power transmission applications requiring high ratio speed reduction in a limited space. The gears are used on right angle, non-intersecting shafts. When properly aligned, worms and worm gears are the quietest and smoothest form of gearing. One drawback of worm gearing is as the ratio of this gearing increase, the efficiency of the gearing decreases. A worm gear reducer is a right angle speed reducer that allows the maximum speed reduction in the smallest package.. |
AN276740 |
Application |
Fits John Deere 9900 9910 9930 9940 9950 9970 ++ |
Product Display
Relater Products
Company Information
Logistics Delivery
1.Q:Are you manufacturer or trade company?Where?
A:We are manufacturer which located in HangZhou,ZheJiang China . EPG – one of the biggest Agri-Machinery parts factory in China .
2.Q:What is your terms of payment ?
A: Payment=10000USD, 50% T/T in advance ,balance before shipment. Irrepealable LC at sight for big order is considerable.
3.Q:What about delivery time?
A:The delivery time depends on product and quantity .If you want to know the exact time. Email us the quantity,we will check the time for you.
4.Q:Is the website price the final price?
A:No. All the prices are negotiable depending on the amounts.
5.Q:How will you control product quality?
A:We strickly control every detail of production and every product is inspected by our QC team before delivery. Moreover,our production is abided by ISO 9001.
6.Q:When can you get the reply?
A:Any inquiries will be replied within 24 hours.Our sales team will try our best to support you.
80HP China pto shaft parts in Pereira Colombia Farm Machinery 4WD Medium New Agricultural Tractor for Sale with ce certificate top quality low price
We – EPG Team the most significant agricultural gearbox and pto manufacturing unit in China with five distinct branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
80HP Farm Machinery/4wd/Medium/New/Agricultural Tractor for Sale
Specialized Parameter
Product No. | TL804 | |
Type | four*4 | |
Engine | Product | EPT 4108(VYT4B5-23) |
Bore×Stroke(mm) | 108×135 | |
Rated energy(kw) | 62.five | |
RPM | 2300 | |
Total dimension (L*W*H) | 4395*2048*2860 | |
Tread(mm) | Entrance | 1610 |
Rear | 1620 | |
Wheelbase | 2195 | |
Clutch Sort | Solitary blade,dry,butterfly spring pressed, separate procedure,double purpose | |
Equipment Box | Two shaft, Straight enamel, differential lock | |
Equipment change | 16F+8R,Shuttle shift | |
Bodyweight (kg) | 3740 | |
Tyre | Entrance | eleven.two-24 |
Rear | 16.nine-34 | |
PTO(RPM) | 760/one thousand | |
PTO Shaft Spline (mm) | 6D-38×32×6 | |
Other folks | Crawl change, Air brake, 2-way hydraulic valve, entrance ball EPT weight and three layer rear ball EPT excess weight, Awning/Sunroof |
Tractor Functions
1.Fuel intake get to upto 1 liter/hour diesel.
two. Differential lock stop rear whee EPT skidding when climbing, running in paddy land and wet climate.
3.Equip with double pace of PTO shaft 760/one thousand rpm. Tailored to distinct area variety.
4.Adopt full hydraulic steering, impartial gasoline tank, easy functioning and higher mobility.
5.Adju EPT front and rear tracks meet agricultural demands of various areas. Added-big drinking water tank and large potential maintenance-totally free battery make the device with greatest heat-dispersion and commencing overall performance.
6.Can undertake to a variety of implements,this kind of as plough,disc plough,ratory tiller,disc harrow,etc.
Organization Profile
TANGLAND EPT Company, is a wholly-owned subsidiary of TANGLAND Team, is the specialist business for Buying and selling & EPT Exchange and cooperation. We established up branches in ZheJiang , ZheJiang and HangZhou, as well as overseas assembling plant, or/and showing place and service centre, in Pakistan, UAE, and some Asian & African countries. TANGLAND Group is a extensive company including manufacturing, assembling, Casting & Foundry, producing Casting parts, Electric powered Automobile, Tractor, Light-weight truck, Semi-trailer, Steel ball and Nylon six merchandise, Operating an Industrial products’Information & Trade Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Exchange system named-TANGLANDINFORMATION & Engineering Firm.
Workshop
Deal
Our Provider
Pre-Product sales Provider
one. Inquiry and consulting support.
two. Sample tests help.
three.See our Manufacturing facility.
After-Product sales Provider
one.Training how to put in the equipment, education how to use,maintain and restore the machine.
two.Engineers offered to services equipment abroad.
FAQ
Q1.What is your phrases of payment?
A:T/T 40% as deposit,and sixty% prior to loading.we will show you the photos of the goods and offers ahead of you spend the stability.
Q2.What your conditions of delivery?
A:EXW,FOB,CFR,CIF.
Q3.How about your delivery time?
A:Normally,it will get about twenty days following receipt of deposit payment.The specific supply time relies upon on the objects and the amount of your buy.
This fall.Are you fascinated in dealership with local organization?
A:Sure,we are fairly fascinated in this organization.we might like to cooperate with some nearby companion to sell far more tractors in neighborhood industry and provide much better support.
Q5.Do you examination all your tractors ahead of shipping and delivery?
A:Of course,we have 100% tractor test and comprehensive top quality control method ahead of supply.
Q6.How do you make our company prolonged-expression and great partnership?
A:1.We maintain great good quality,competitive price and productive provider to ensure our buyers benefit
two.We defend the advantage of dealer or agent,in specifical time period and area.