Tag Archives: China worm gear cutting

Non explain how the efficiency of worm gear drive is calculated factory China in Nakhon Ratchasima Thailand Stop Full Automatic Die Cutting and Creasing Machine for Corrugated Sheet with top quality

Non  explain how the efficiency of worm gear drive is calculated  factory  China  in Nakhon Ratchasima Thailand  Stop Full Automatic Die Cutting and Creasing Machine for Corrugated Sheet with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

QMY1200P/1300P/1500P Automatic Die-cutting and Creasing Machine(Front Lead Feeding with Stripping Unit)

  • Main features:
  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
  • Specifications:
Model Unit QMY1200P QMY1300P QMY1500P
Max. Paper Size  mm 1200X780 1300X960 1500X1100
Min. Paper Size mm 350X350 400X400 500X400
Max. Die-cutting Size mm 1180X760 1280X940 1480X1080
Max. Speed sh/h 0-5000 0-4600 0-4000
Max. Wor ept Pressure T 300 300 300
Max. Paper Thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 32.5kw 32.5 36.5
Overall Dimension mm 8600X4000X2350 9100X4250X2345 9600X4700X2400

 
 
 

  • Features of the machine:

Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
    • Speed:  

 
The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 5000 times per hour. During actual production, it can generally run at 3600 to 4200 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at highest speed.

  • Safety:

 
As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
 
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.
 

  • Operation convenience:

 
There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.
 
 

  • Main Structures and Key Material Used

 

  • Four Main Big Parts:

They are: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:

 

 
 
The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put which is not less than 300 tons.
 

The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.
 

  • Die-cutting and Creasing Part:

 
The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
 
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
 
 
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  
 

  • Board Conveying:

 

 
It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

 
 

 
The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.
 

  • Installation of Die

 
 
 
 
The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.
 

  • Special Characters of Our Machine:

 

  • Clever And Special Front Lay Design:

 

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
 
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
 
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
 
As it is our special design, so there is no picture to be shown here.
 

  • None-stop Collecting unit

   At the delivery part, when the board is cut to be about 1 meter, the machine will push
the die-cut board pile out of the machine delivery part so that it is easy for the operator to draw them to the designated place without the need of stopping the machine .
 
 
 
                    

 

  • Front-lead Feeding Part

   The machine adopts patent technology of front-lead feeding structure, which can effectively prevent and reduce damages to the surface of printed sheet. Equipped with strong blower, even paper is bending deformation, can feed paper smoothly.
 
 
 
 
 
 
 
 

 
 

  • Stripping Part  

    (a) The machine is half striping which can strip off three – edge waste and middle holes of the board.
(b) There are upper chase, middle chase and lower chase where the male, elastic block and
female die are placed to strip off the waste.
 
 
 
                               
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
              
 

  • Configurations:

 

Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Non  explain how the efficiency of worm gear drive is calculated  factory  China  in Nakhon Ratchasima Thailand  Stop Full Automatic Die Cutting and Creasing Machine for Corrugated Sheet with top quality

Non  explain how the efficiency of worm gear drive is calculated  factory  China  in Nakhon Ratchasima Thailand  Stop Full Automatic Die Cutting and Creasing Machine for Corrugated Sheet with top quality

Die worm gear in rack and pinion near me shop China in Luanda Angola Cutting and Creasing Machine with Front Edge Feeding with top quality

Die  worm gear in rack and pinion  near me shop  China  in Luanda Angola  Cutting and Creasing Machine with Front Edge Feeding  with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

  • Specifications:

 

Model Unit QMY1200P QMY1300P QMY1500P
Max. Paper Size mm 1200*780 1300*960 1500*1100
Min. Paper Size mm 350*350 400*410 400*440
Max. Die-cutting Size mm 1180*760 1280*940 1480*1080
Max. Speed sh/h 5500 5500 4500
Max. Wor ept Pressure T 300 300 300
Cardboard sheet thickness g/m2 250-800 250-800 250-800
Corrugated sheet thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 22.5 22.5 27.5
Total Weight kg 14500 15500 19000
Overall Dimension mm 8000*4000*2250 8750X4100X2245 9400X4600X2245

. Features of the machine:Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
  • Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 5000 times per hour. During actual production, it can generally run at 3600 to 4200 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at highest speed.

  • Safety:

As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
 
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  • Operation convenience:

 
There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.
      Main Structures and Key Material Used

  • Four Main Big Parts:

They are: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:

 
 
The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.
The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  
 

  • Board Conveying:

 
It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
 
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  • Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.
Special Characters of Our Machine:
Clever And Special Front Lay Design:
Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

  • None-stop Collecting unit

At the delivery part, when the board is cut to be about 1 meter, the machine will push
the die-cut board pile out of the machine delivery part making it easy for the operator to draw them to the designated place need not topping the machine 

  • Front-lead Feeding Part

The machine adopts patent technology of front-lead feeding structure which can effectively prevent and reduce damages to the surface of printed sheet. Equipped with strong blower, even paper is bending deformation, it can feed paper smoothly.

  • Configurations:

 

Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 

  • Tools Kit

 

Name Amount Specification
Minus Screw Driver 1 150
Plus Screwdriver 1 150
Monkey Wrench 1 300
Inner hexagon Spanner 1 set 1.5\2\2.5\3\4\5\6\8\10\12\14
Greasing Gun 1  
Oil Gun 1  
Wrench One set 12,14/13,16
Vise 1  
Triangular File 1  

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Die  worm gear in rack and pinion  near me shop  China  in Luanda Angola  Cutting and Creasing Machine with Front Edge Feeding  with top quality

Die  worm gear in rack and pinion  near me shop  China  in Luanda Angola  Cutting and Creasing Machine with Front Edge Feeding  with top quality

Semi-Automatic how to model a worm gear in solidworks manufacturer China in Kryvyi Rih Ukraine Corrugated Die Cutting with Double Registration System with top quality

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

MY E SERIES

  • Specifications:
Model Unit MY1200E MY1300E MY1500E
Max. Paper Size  mm 1200X780 1300*960 1500X1100
Min. Paper Size mm 350X350 400*410 500X410
Max. Die-cutting Size mm 1180X760 1280*940 1480X1080
Max. Speed sh/h 0-5500 0-5500 0-4500
Max. Wor ept Pressure T 300 300 300
Max. Paper Thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 15 15 19
Total Weight kg 13500 15000 18000
Overall Dimension mm 6730*4230*2145 7250*4530*2145 7700*4795*2205
  • Features of the machine:

Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
    • Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3600 to 4000 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at 4200 times per hours without feeling too hard.
 

  • Safety:

As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  • Operation convenience:

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.

  • Main Structures and Key Material Used
    • Four Main Big Parts:

They are referring to: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.

 
The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of semi-automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
 
 
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Remold U.K with high precise and quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

 

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  • Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.

  • Special Characters of Our Machine:
    • Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

  • Optional Delivery Platform:

According to the requirement of the client we can do the delivery platform either square type or E type (as shown in the picture) . If the client has enough pallets, he can choose square type. If the client does have enough pallet, he can choose, E type platform for which will also provide 4 delivery trolleys.      

  • Pneumatic Preloading and Lifting Step Unit:

 

The preloading device is pneumatic driven. When one paper size is set, when you do other pile of preloading, there is no bother of you to reset the preloading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Quite some of the die-cutting machine producers use direct feeding method which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only 0.3 seconds which makes the board feeding work hard and inaccurate.
 
Our machine uses an additional dance roller feeding system whose board feeding time can be extend to 0.6 second. Together with the conveying parts it makes an easier work of the operator and faster in efficiency of the machine.
For example:  If an operator operates the direct feeding semi-automatic die-cutting machine at 3300 sheets per hour, he can easily operate our machine at 3700 – 4000 sheets per hour.

  • Conveying Part:

 

The board received by the dance roller will go through a conveying part with belt conveying and belt pressing which makes the board being pressed before reaching to the front lay.
Before the board reaches to the front lay, he will be repositioned by the side lay.
By these ways, the board conveyed by the dance roller will be more accurate and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at normal position, the detector will send signals to stop the machine.

  • Configurations:
Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

High worm gear cutting tools Cost China in Sanaa Yemen Quality Milling Machine Lathe Bed with ISO9001 Certified with top quality

High  worm gear cutting tools  Cost  China  in Sanaa Yemen  Quality Milling Machine Lathe Bed with ISO9001 Certified with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Customer gives high praise and is willing to place more orders:

Product Name  High quality milling machine lathe bed with ISO9001 certified
 Material

Ferrous materials:cast iron, grey iron, ductile iron, austempered ductile iron , carbon steel,stainless steel, low alloy steel, high chromium/manganese steel

Non-ferrous: aluminum alloy, copper alloy,brass, bronze titanium alloy(being built)

 Process  Lost foam casting,Resin sand casting,Wood/Metal Mould
 Equipment  Molding machine, lost foam casting production line, CNC machining center, general machine tools,CNC laser cutting machine,large-scale press machine
 Finish zinc phosphide, zinc plating, hot dip galvanized, e-coating, spray paint, black oxide coating ,anodized,passivation and others
Testing Instrument Spectrum analyzer, tension tester, hardness tester, three coordinates measuring instrument, caliper, micrometer, dial gauge, microscope, roughness tester, salt spray testing machine, ultrasonic flaw detector, X-ray detection machine, magnetic particle flaw detector, air tightness testing machine, thickness gauge
Product Application CNC lathe/milling machine 
Other main casting products  Auto parts,large mining equipment accessories, engineering machinery parts, valve parts, large diameter pipe fittings, , agricultural machinery parts,construction machinery, gear box,body case etc.

  • High precision of casting geometry, stable casting internal structure;
  • No flash, burr and cold separation, uniform and consistent, less casting defects such as sand hole, air hole, shrinkage and loose;
  • High surface finish, less machining allowance and polishing, no casting defects and waste caused by parting and core-making;
  • The molding sand can be reused completely, eliminating the molding sand preparation process and waste sand treatment process;
  • Easy to mechanized and automatic flow production, with high elasticity, and can realize flow production of different alloys and castings of different sizes and shapes on one production line. Factory design is simplified and production cost is reduced.

Superior casting products come from excellent equipments and precision detection.

1. TOTAL AREA & MAIN PRODUCTS

1.1 We are a manufacturer established in 2000 year in Xihu (West Lake) Dis. District,HangZhou City

1.2. A total area of more than 500,000 square kilometers and the building area of 300,000 square kilometers with 5 factories included.

1.3 Our main products are casting products,like vehicle mold,machine tool bed ,gear box,worm-gear case,valve body,compressor housing, etc, Auto accessories, stamping parts, truck cabin,truck body etc.

2. EQUIPMENTS

Our company has a full chain production capacity of molding, stamping, welding, assembling and coating. The total asset reaches 1.35 billion yuan.

2.1 Large-scale press/stamping equipments with great tonnage span 160T-2400T, also with small punching machine for small stamping parts.

2.2 ROBOT welding and binding line

2.3 5 center JAPANESE OKUMA CNC machining centers

2.4 Electrophoresis and painting line

2.5 2 tons & 10 tons electric furnace

2.6 Waste collection and dust removal system

3. TECHNOLOGY CENTER

Our technology center was awarded as City-level Technology Center.

3.1 A professional technical team of 40 engineers

3.2 More than 100 domestic patents

3.3 Advanced programming software AUTOCAD,CAM,CAE,CIMATEON,UG etc3.4 Superior engineering equipments and facilities for detection,like Three coordinate measuring instrument ,Spectral analysis,Computer carbon and sulfer analyzer,tryout presses etc.
 

4. CERTIFICATIONS

4.1 ISO9001-2008:    International quality management system certification 

4.2 ISO/TS16949:2009:   Quality management system certification 

4.3 ISO14001:   Environmental management system certification 

4.4 OHSAS18001:  Occupational health management system

4.5 CCC: China Compulsion Certification(3C)

4.6 AAA corporate credit rating

5. CUSTOMERS

Our products have been exported to America,India, Africa and other countries and regions. and provide OEM service for domestic customers,such as 

FAW Xihu (West Lake) Dis. Automobile,  

FAW Xihu (West Lake) Dis. HangZhou Automobile,

SAIC General Motors Xihu (West Lake) Dis.yue Automobile

HangZhou Automobile,

BAIC Motor and ZheJiang Benz Automobile,

and other well-known factories in china.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

High  worm gear cutting tools  Cost  China  in Sanaa Yemen  Quality Milling Machine Lathe Bed with ISO9001 Certified with top quality

High  worm gear cutting tools  Cost  China  in Sanaa Yemen  Quality Milling Machine Lathe Bed with ISO9001 Certified with top quality

Long worm gear cutting tools Cost China in Samarkand Uzbekistan Life High Torque DC Gear Motor for Sorting Machine with Encoder with top quality

Long  worm gear cutting tools  Cost  China  in Samarkand Uzbekistan  Life High Torque DC Gear Motor for Sorting Machine with Encoder with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Long Life High torque DC Gear Motor for Garden Tool with encoder

Product characteristic 
1. Stator size is optional
2. Safe, reliable, low noise, good starting, long life
3. Strong power
Rated voltage 12-24vol/50Hz

Typical used: 
 motor is widely usedn in home appliances as Microwave turing plate, Quartz heater, Dishwasher, Can opener, Knife sharpener, washing machine

Electrical specification 

MODEL VOLT POWER FREE SPEED FREE CURRENT
D49R 24V 30W 180±5RPM <0.65A
D76R 12V 70W 80±8RPM <0.65A
D63R 12V 70W 65±6RPM <0.65A

Mechanical dimensions 

ABOUT US

Ritscher group was established in 2006.we always focus on micro-motors for household and industrial electrical appliance.Currently, we have professional micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and more than 500 employees, annual output  is 5 million pcs and has 10 million pcs annual producing capacity.After years development,we built a great reputation in the domestic and ove ept market and have the ept from our  global customers.
We  started our business from shaded pole motors, after 10 years development,our products  is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products  are widely used for ma ept refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technology motors and meet our customers requirments,we have the very capable  R&D team,to ensure our products quality ,we have very strict manage system for our production department & QC department,to make our cost lower,we have the very professional purchase department, We dedicate to make every details better than we could do.
To offer quick and better service to our customers in Australia and New Zeland,we set up branch office in Australia since 2017 with exprienced consultant to support the business ,which will bring more customers to get know of us.
We will keep doing our job,move ept step by step to make our business area wider and brighter.

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kit ept Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Long  worm gear cutting tools  Cost  China  in Samarkand Uzbekistan  Life High Torque DC Gear Motor for Sorting Machine with Encoder with top quality

Long  worm gear cutting tools  Cost  China  in Samarkand Uzbekistan  Life High Torque DC Gear Motor for Sorting Machine with Encoder with top quality

Industrial screw cutting gear ratio calculator near me shop China in Okayama Japan Worm Gearbox Wp Series Wpdo150 Worm Gear Speed Reducer with top quality

Industrial  screw cutting gear ratio calculator  near me shop  China  in Okayama Japan  Worm Gearbox Wp Series Wpdo150 Worm Gear Speed Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

We are a professional manufacturer with 10years’ experience, welcome for the inquiry and visiting.
 

ept brand 0.12kw~15kw WP Series WPDO Worm Gearbox

Components:
1. Housing: Cast Iron
2. Gears: Worm Gears, 1 stage
3. Input Configurations:
Solid Input Shaft
Motor Flange – IEC B5
4. Output Configurations:
Solid Output Shaft
Hollow Output Shaft
 

Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically
2. Compact structure
3. Direct drive or indirect drive available
4. Output could be solid shaft or hollow hole
 

Models & Variants:
WPA Series – Lower Input Shaft
WPS Series – Upper Input Shaft
WPDA Series – Lower Input Flange
WPDS Series – Upper Input Flange
WPO Series – Vertical Upward Output Shaft
WPX Series – Vertical Downward Output Shaft
WPDO Series – Vertical Upward Output Shaft, Input Flange
WPDX Series – Vertical Downward Output Shaft, Input Flange 

Gearbox Parameters:
 

Type: gearbox WPDO
Model: WPDO 40-250
Ratio: 1:5,10,15,20,25,30,40,50,60,70,80,100
Color: Blue/Silver Or On Customer Request
Material: Housing: Die-Cast Iron cast
Worm Gear-Copper-9-4#
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       KSK
Warranty: 12 Months
Input Power:   

0.12kw~15kw                                                                   

Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange:

B5

Lubricant: Synthetic&Mineral

1. Q: What information should I tell you to confirm the worm gearbox?
A: Model/Size, B: Ratio and output torque, C: Power and flange type,
D: Shaft Direction, E: Housing color, F: Order quantity.
 
2. What type of payment methods do you accept?
A: T/T; B: B/L; C: CASH;

3. What’s your warranty?
One year.
 
4. How to delivery?
A: By sea- Buyer appoints forwarder, or our sales team finds suitable forwarder for buyers.
By air- Buyer offers collect express account, or our sales team finds suitable express for buyers. (Mostly for sample)
Other- We arrange to deliver goods to some place in China appointed by buyers.
 
5. Can you make OEM/ODM order?
Yes, we have rich experience on OEM/ODM order and like sign Non-disclosure Agreement before sample making.

Our Advantages:

1.Reasonable price with excellent quality
2.Each one tests carefully
3.Clear nameplate
4.Reliable package
5.High efficiency, smooth runingand low noise
6.Best materials make best performance

Quality inspection procedure:

We have 20 QC/QA workers.10 strict QC processes including incoming materials QC, IPQC  10 Ageing test QC100% products will go through a 24-hours ageing test QC)before shipping.

Pls contact us for any questions.Hope we can establish a good relationship.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Industrial  screw cutting gear ratio calculator  near me shop  China  in Okayama Japan  Worm Gearbox Wp Series Wpdo150 Worm Gear Speed Reducer with top quality

Industrial  screw cutting gear ratio calculator  near me shop  China  in Okayama Japan  Worm Gearbox Wp Series Wpdo150 Worm Gear Speed Reducer with top quality