Tag Archives: China double worm gear

China Best Worm gearbox manufacturer supplier & factory Worm Transmission Gear Series Double Enveloping Worm Gear Worm Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Worm Transmission Gear Series Double Enveloping Worm Gear Worm Gearbox with top quality best prices

We – EPG Group the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 distinct branches. For more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Worm Transmission Equipment Series Double Enveloping Worm Gear Worm Gearbox

Merchandise Description

Sequence C  double enveloping worm gear
Product: one hundred – five hundred
Ratio: ten -63
Output Torque : 683 – 51180 N.m
Rating Electrical power : forty seven/25HP(1.41Kw) – 597HP(448Kw)

 

In a Worm Gearbox, Worm Reduction Gear Box, Worm Speed Reducer and Gear Motor Manufacturer, three to eleven equipment enamel are typically in get in touch with with the worm, relying on the ratio. The improved amount of pushed gear tooth that are in get in touch with with the worm significantly boosts torque capacity also raises shock load resistance. In addition to growing the number of pushed equipment teeth in get in touch with with the worm, Worm Gearbox, Worm Reduction Gear Box, Worm Pace Reducer and Equipment Motor Producer also increases the make contact with location on every single equipment tooth. The real locations of instantaneous contact between the worm threads and the pushed equipment tooth are strains. These lines of get in touch with shift throughout the face of the equipment tooth as it progresses through its complete time of mesh with the worm. The lines of make contact with in double-enveloping worm gearing are configured to boost the power transmission ability and decrease the stress on each equipment tooth.

 

Wor ept circumstances

Two shafts for 90 ° Intersect, input velocity should not be more than 1500 rpm.The wor ept environment temperature should range from  0 ~ 40 ° C, when the surroundings temperature below ° C or above forty ° C.Ahead of beginning the lubricating oil to corresponding heating and cooling, The worm shafts, reverse procedure can be optimistic.

Knowledge sheet on CUW double enveloping worm equipment gearbox :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Energy Ratio Permitted Torque Fat
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 forty eight one.forty one~eleven.5 10 .twenty five~ 62 683-1094 42
one hundred twenty five 32 225 55 two.forty two~19.7 10 .25 ~ 62 1170~2221 sixty five
one hundred forty 38 255 65 three.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
one hundred sixty 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.eighty three~forty seven.5 10 .25 ~ 62 2812 ~ 5387 one hundred seventy
200 fifty five 350 90 7.52 ~sixty one.two 10 .25 ~ 62 3624 ~6859 220
225 sixty 390 100 nine.9~81.four 10 .25 ~ 62 4872 ~ 9224 290
250 sixty five 430 a hundred and ten twelve.9 ~a hundred and five 10 .25~ 62 6284~11892 380
280 70 480 one hundred twenty 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 seventy five 530 a hundred and forty 22.5 ~183 10 .25 ~ 62 11068~ 19450 seven-hundred
355 80 595 150 thirty~245 10 .25 ~ 62 14818 ~28014  1030
four hundred 90 660 one hundred seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 a hundred 740 a hundred ninety forty two.6 ~347 10 .25 ~ 62 2571~39881 1980
500 one hundred ten 815 210 fifty four.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

Benefit: 
The advantage of ept Higher Effectiveness, Reduced Noice Cone Worm Sequence Worm Gearbox design are extraordinary. 1st, the overall load is divided between a lot more personal gear tooth, and the load is additional divided exactly where tooth help two traces of contact. This exceptional load distribution drastically will increase load carrying ability. Second, the enhanced torque throughput allows a scaled-down gearbox to produce the very same quantity of torque, resulting in size and excess weight savings.
Double-enveloping worm gearing can have loads that would need much greater and heavier cylindrical worm gearing.

 

 Double-enveloping worm gearbox figure :

(Click on on photo for more information)

 

 

/ The use of unique equipment manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the outlined substitute parts contained herein are not sponsored, approved, or created by the OEM. /

China Best Worm gearbox manufacturer supplier & factory Worm Transmission Gear Series Double Enveloping Worm Gear Worm Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Worm Transmission Gear Series Double Enveloping Worm Gear Worm Gearbox with top quality best prices

Double 7.5 hp three phase motor amps near me shop made in China – replacement parts – in Tunis Tunisia Worm Gearing Arrangement Reducer Gear Worm Gearbox with top quality

Double 7.5 hp 3 period motor amps close to me store  produced in China - alternative parts -  in Tunis Tunisia  Worm Gearing Arrangement Reducer Equipment Worm Gearbox with prime top quality

We – EPG Group the biggest worm gearbox, couplings and gears manufacturing unit in China with 5 distinct branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Merchandise Introduction:

Double worm sequence gearbox is a new-generation of products produced by our factory on the foundation of introducing foreign sophisticated technology,its’ primary functions are as follows:

one Created of large high quality aluminum alloy, light bodyweight and non-rusting
two Large output torque and large radiating effectiveness
three Sleek operating and low sound
4 Very good-loo ept appearance, durable services daily life and little volume
5 Suitable for omnibearing installation

  Motovario, SITI, STM,

Our manufacturing facility is the major manufacturer and exporter of worm gear gearbox in China. We had been established in 1976. We are the best seller in export of worm gears in China, 1st to obtain export License and 1st to achieve ISO9001 and CE Certification among producers of gearboxes in China. We are private enterprises considering that 1996. We have workers and workers of five hundred and the yearly output last 12 months is twenty five million U. S. Bucks. About 70% of the total output is exported to as numerous as 38 international locations this sort of as Usa, Canada, Italy, Spain, , Germany, Uk, Japan, Korea, Indonesia, and etc.

 

 

Many thanks for your mail. We are extremely interested in cooperating with you. We are company and exporter of the following items:

1. Worm equipment speed gearbox (iron steel circumstances)

two. Motovario type aluminum scenario worm gear velocity gearboxes

3. SEW kind helical gear speed gearboxes

four. Sumitomo type cyclo drive gearboxes.

five. ROTEX type jaw coupling

six. Flange coupling

Bathroom ept ept to the opertunity of cooperating with you in the near long term!

/ The use of original products manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the shown alternative elements contained herein are not sponsored, approved, or made by the OEM. /

Double 7.5 hp a few period motor amps in close proximity to me shop  manufactured in China - replacement components -  in Tunis Tunisia  Worm Gearing Arrangement Reducer Gear Worm Gearbox with prime high quality

Double 7.5 hp three stage motor amps around me shop  manufactured in China - alternative areas -  in Tunis Tunisia  Worm Gearing Arrangement Reducer Equipment Worm Gearbox with leading quality

Double worm and worm wheel gear ratio factory China in Seoul Republic of Korea Color Strip Film Blowing Machine with top quality

Double  worm and worm wheel gear ratio  factory  China  in Seoul Republic of Korea  Color Strip Film Blowing Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Application

Suitable for blowing low density polyethylene (LDPE), high density polyethylene (HDPE), and linear low density polyethylene (LLDPE) plastic film.

Main technical parameters

  1. Thickness of products: 0.008 – 0.12mm
  2. Width of the product: 100-600mm
  3. Maximum output: 50-60kg/h
  4. The total power: 40KW
  5. The voltage: three-phase four wire 380V
  6. The weight: 1.5T
  7. Dimensions: 4000*3000* 4300mm (length*width*height)
  8. The toolbox: machine parts, inner six angle wrench, test pencil, filter etc.
  9. Main machine parts: extruder parts, machine frame and a traction part, rolling parts, electrical parts

Main configuration

the extruder section:

  1. The screw diameter: Φ45mm*2  (high quality alloy steel 38CrMOALA) nitriding
  2. Screw + material tube: material 38CrMOALA    screw from HangZhou  2 group of 180W reel     cooling fan
  3. Screw length diameter ratio: 28:1
  4. The screw speed: 10 – 90rpm
  5. The reel cooling: 180W*1*2/380V (strong wind cooling performance)
  6. The process of normalizing: – -quenching-conditioning- elimination of stress – nitriding
  7. hydraulic quick net changing device (San Tong): flow hard chrome plating (improve brightness and membrane fluidity of the film) &180 high temperature treatment
  8. The heating control area: barrel three area,  net change one area, die area one area 
  9. heating ring: all aluminum skin (quick heating, no color change, durable)
  10. The heating power: 16KW
  11. Temperature control: intelligent double number phenotypes, temperature control meter
  12. All use stainless steel heater
  13. Blower: 1.5kW / 380 (compression type can increase the output, variable frequency control)
  14. Wind ring: φ620 Aluminum Alloy high-pressure air ring (with the chassis and air pressure double outlet)
  15. Gear box: 133  China Standard (GB) hardened gear box, with pump
  16. Main motor: 7.5KW *2  three-phase  four level 380V   (ZheJiang special motor factory) inverter control
  17. Die structure: inside spiral, center feed
  18. Die material: 45# steel die runner hard chromium plating
  19. Die specifications: Φ70mm     A fixed die     B rotary die head 

                   
traction part

  1. Rack height: 4.3 meters fixed traction
  2. The steel structure: steel structure: frame (ladder), a safe operating platform and safety fence
  3. The traction converter: 1.5KW (ZheJiang DEXIHU (WEST LAKE) DIS. Electromechanical Factory)
  4. The traction device: worm gear variable speed, traction stabily
  5. The stable foam : squirrel cage type (six of each group independently adjustable)
  6. The traction roller: rubber roller, fixed traction
  7. The guide roller (roller): all rollers are 700mm
  8. The ZheJiang Luo Chen, general inverter (1.5KW inverter and host in the same control cabinet)
  9. Roller width is 700mm       traction roller material: rubber roller
  10. The baffle bar type foam frame used in the 600 film width
  11. Centering rod: special taper
  12. Maximum angle: 22 degrees (adjustable)
  13. Inserted edge: Wooden adjustable  

Rewinding part
A. Single rewinding

  1. Winding way: the friction type single winding, big drum close to rewind
  2. Scroll structure: horizontal type
  3. Large drum diameter: 250mm
  4. The winding motor: 1 set torque motor speed adjust dial, 1 set 5n/m torque motor (the respective transmission film flatness is pretty good)
  5. The winding quantity: 2 pcs winding roll

B. Single rewinding with twice tracting

  1. Winding way: the friction type single winding belt two times of traction, big drum close to rewind
  2. Scroll structure: horizontal type
  3. Large drum diameter: 250mm
  4. The winding motor: 2 set torque motor speed adjust dial, 2 set 5n/m torque motor (the respective transmission film flatness is pretty good)
  5. The winding quantity: 2 pcs winding roll

 
C. Double rewinding

  1. Winding way: Friction type single winding, large drum close to rewind
  2. Scroll structure: horizontal type
  3. Large drum diameter: 250mm
  4. The winding motor: 3 set torque motor speed adjust dial, 3set 5n/m torque motor (the respective transmission film flatness is pretty good)
  5. The winding quantity: 4 pcs winding roll

 
Electrical components

Power distribution cabinet 1 set, AC contactor, temperature control table, C45 switch, air switch, button, inverter, transformer, exhaust fan, current meter, voltage meter (China well-known brands, such as CHINT, people’s electrical appliances)

Detailed Images

Why us

PE film production process

The Quality We Provide – Outstanding Quality Assurance

Control from production process

•We don’t send mechanical parts out for pretreatment, all process would be supervised under inspection department, we have 4sets 

CNC processing machine. 
•7 stages pretreatment meet international standard
•Ba ept at high temperature after power coating to ensure the paint finish

Control from material

•All bolts and screws are of SS material
•Mild steel ERW rectangular tubes or sheets 1.2-2.0mm thickness, meet EU standard
•Plastic material is of ABS only. Durable and Sturdy. At least 10 years lifetime. Different colors for options.

•Process inspections after cold working, acid washing,powder coating and assembling
 

The Service We Provide – We Take Care Of Your Order

Punctual delivery time

•We put your order into our tight production schedule, ensure your punctual delivery time.
•Production / inspection report before your order packed.
•Shipping notice/ insurance to you as soon as your order is shipped.

After sales service

•We respect your feed back after receive the goods.
•We provide 12-24 months warranty after goods arrive.
•We promise all spare parts available in lifetime use.
•We respond your complain within 48hours.

Professional sales

•We value every inquiry sent to us, ensure quick competitive offer.
•We cooperate with customer to bid tenders. Provide all necessary document.
•We are a sales team, with all technical support from engineer team

For machine services

•Installation Services are available with all new machine purchases. We will provide the technical know-how for your operation smooth transition and support for installing, debugging, operation of the machine, it will indicate you how to use this machine well.
•We can train your staff to use new equipment systems properly. It means that we offer Customers Training, teaching how to use the systems most efficiently and safely as well as how to maintain optimal operational productivity in the condition of salary 80USD per day,also including the charge for transportation,accomodation,etc.

Pac ept & Delivery

Packaging
Size 123 (L) * 456 (W) * 789 (D)
Weight 1.2 T

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for pac ept or pack it according to customers special request.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Double  worm and worm wheel gear ratio  factory  China  in Seoul Republic of Korea  Color Strip Film Blowing Machine with top quality

Double  worm and worm wheel gear ratio  factory  China  in Seoul Republic of Korea  Color Strip Film Blowing Machine with top quality

Semi-Automatic how to model a worm gear in solidworks manufacturer China in Kryvyi Rih Ukraine Corrugated Die Cutting with Double Registration System with top quality

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

MY E SERIES

  • Specifications:
Model Unit MY1200E MY1300E MY1500E
Max. Paper Size  mm 1200X780 1300*960 1500X1100
Min. Paper Size mm 350X350 400*410 500X410
Max. Die-cutting Size mm 1180X760 1280*940 1480X1080
Max. Speed sh/h 0-5500 0-5500 0-4500
Max. Wor ept Pressure T 300 300 300
Max. Paper Thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 15 15 19
Total Weight kg 13500 15000 18000
Overall Dimension mm 6730*4230*2145 7250*4530*2145 7700*4795*2205
  • Features of the machine:

Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
    • Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3600 to 4000 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at 4200 times per hours without feeling too hard.
 

  • Safety:

As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  • Operation convenience:

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.

  • Main Structures and Key Material Used
    • Four Main Big Parts:

They are referring to: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.

 
The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of semi-automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
 
 
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Remold U.K with high precise and quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

 

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  • Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.

  • Special Characters of Our Machine:
    • Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

  • Optional Delivery Platform:

According to the requirement of the client we can do the delivery platform either square type or E type (as shown in the picture) . If the client has enough pallets, he can choose square type. If the client does have enough pallet, he can choose, E type platform for which will also provide 4 delivery trolleys.      

  • Pneumatic Preloading and Lifting Step Unit:

 

The preloading device is pneumatic driven. When one paper size is set, when you do other pile of preloading, there is no bother of you to reset the preloading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Quite some of the die-cutting machine producers use direct feeding method which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only 0.3 seconds which makes the board feeding work hard and inaccurate.
 
Our machine uses an additional dance roller feeding system whose board feeding time can be extend to 0.6 second. Together with the conveying parts it makes an easier work of the operator and faster in efficiency of the machine.
For example:  If an operator operates the direct feeding semi-automatic die-cutting machine at 3300 sheets per hour, he can easily operate our machine at 3700 – 4000 sheets per hour.

  • Conveying Part:

 

The board received by the dance roller will go through a conveying part with belt conveying and belt pressing which makes the board being pressed before reaching to the front lay.
Before the board reaches to the front lay, he will be repositioned by the side lay.
By these ways, the board conveyed by the dance roller will be more accurate and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at normal position, the detector will send signals to stop the machine.

  • Configurations:
Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

Semi-Automatic  how to model a worm gear in solidworks  manufacturer  China  in Kryvyi Rih Ukraine  Corrugated Die Cutting with Double Registration System with top quality

M&K-1215 nema 23 worm gear shop China in Indianapolis United States Dw Double Clamp Worm Screen Stretching Machine with top quality

M&K-1215  nema 23 worm gear  shop  China  in Indianapolis United States  Dw Double Clamp Worm Screen Stretching Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product Code 008008
Product Name M&K-1215 Dw Double Clamp Worm Screen Stretching Machine
HS code 8442357100
Max working area 1200x1500mm
Maximum tension 45N
Working air pressure  0.40-7MPa
Net weight 230KG
Gross weight 250KG
Pac ept size 170*60*60cm
Pac ept volume 0.61m³
Pac ept material Export wooden case

1.the beam with 1200x80mm special square tube production,tension up to 45 Newton,
long-term high tension pull the net beam is not deformed. Built-in track skateboard,
four sides of the beam can be movable type,flexible and convenient to shrink,
according to the size of the network frame to adjust the net area,effectively save the yarn.

2.the use of material system pull net chuck,chuck base plate with 45thick steel plate
bending welded together,can withstand long-term high tension, chuck with the import of
rubber strips,do not fall of,do not hurt the mesh, not Retreat.

3.the use of ZheJiang imported turbine rod gear box drive,the use of gears,
racks and linear bearings do travel guide,changing the traditional chain drive,
this design is more evenly,higher precision,pull the net more light.
4.with four synchronous top mesh cylinder,so that when the network to ensure quality.

About Macrokun

Macrokun which responsibly manufacturer and exporter of Monofilament Polyester Screen
Pringting mesh in China.
Established in 2011.You will soon realize that MACROKUN is a reliable and friendly supplier
of major items to screen printers,Such as *Polyester screen printing mesh, *Screen printing squeegee,
*Aluminum screen printing frames,
*Printing Materials & Accessories
*Stainless Steel Pringting mesh
*Screen printing machine  MACROKUN’s price are significantly lower compared to other suppliers in
the market base on the same quality.
We welcome and appreciate your comments on our service and product,which we need in order to
enhance the quality of our goods and service.

Samples orders usually within 3 days shipped by Courier (DHL, TNT, FEDEX, UPS, EMS and soon)
Small quantity orders usually within 3-7 days shipped by air or by sea.
Large quantity orders usually within 7-15 days shipped by sea.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

M&K-1215  nema 23 worm gear  shop  China  in Indianapolis United States  Dw Double Clamp Worm Screen Stretching Machine with top quality

M&K-1215  nema 23 worm gear  shop  China  in Indianapolis United States  Dw Double Clamp Worm Screen Stretching Machine with top quality

Wpea worm shaft function near me China in Muscat Oman Double Worm Gear Reducer Gearbox with Large Ratio with top quality

Wpea  worm shaft function  near me  China  in Muscat Oman  Double Worm Gear Reducer Gearbox with Large Ratio with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Worm Gear Speed Reducer 
We are manufacturer and exporter of Worm gear speed reducer, helical gear speed reducer, worm helical gear speed reducer, speed variator, cyclo-drive gearboxes, couplings, door/gate operators.

Main features:

1 Made of high quality cast iron, light weight and non-rusting
2 Large output torque and high radiating efficiency
3 Smooth running and low noise
4 Good-loo ept appearance, durable service life and small volume
5 Suitable for omnibearing installation

Our factory is the main manufacturer and exporter of worm gear reducer in China. We were founded in 1976. We are the best seller in export of worm gears in China, 1st to achieve export License and 1st to achieve ISO9001 and CE Certificate among manufacturers of reducers in China. We are private enterprises since 1996. We have workers and employees of 500 and the yearly output last year is 25 million U. S. Dollars. About 70% of the total output is exported to as many as 38 countries such as USA, Canada, Italy, Spain, , Germany, UK, Japan, Korea, Indonesia, and etc.

 

 

Company Profile
 

l  The largest manufacturer and exporter of worm gear reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou ept POWER TRANSMISSION EQUIPMENT CO.,LTD is our new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in China who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CHINA TOP BRAND and Most Famous Trade Mark for reducers.
 

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in China.

   

 

As a professional manufacturer of worm gearbox and worm gear reducers in China, we mainly produce reduction gearbox,aluminum case worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in power, mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

We have 600 workers in our factory, which covers 70,000 square meters in HangZhou. We have been ma ept 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of our products to more than 40 countries all over the word. Our customers come from Italy, Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are OEM made for direct manufacturers of other products. 

 

 

We warmly welcome customers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting our facility, you will have confidence on our products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and engineering team to support most demanding requirement on standard and OEM products.

 

Loo ept ept to meeting you in HangZhou, China.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Wpea  worm shaft function  near me  China  in Muscat Oman  Double Worm Gear Reducer Gearbox with Large Ratio with top quality

Wpea  worm shaft function  near me  China  in Muscat Oman  Double Worm Gear Reducer Gearbox with Large Ratio with top quality

China double enveloping worm gear manufacturers Custom China in Manila Philippines S Series 90 Degree Shaft Helical Worm Gearbox with top quality

China  double enveloping worm gear manufacturers  Custom  China  in Manila Philippines  S Series 90 Degree Shaft Helical Worm Gearbox with top quality

We – EPG Team the most significant worm gearbox, couplings and gears manufacturing facility in China with 5 distinct branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

China S Series 90 Diploma Shaft Helical Worm Gearbox

one. Solution Attributes
S series helical worm gearbox adopts the helical worm gears to make its construction much more realistic. S series not only has increased transmission efficency and loading functionality than those solitary-phase worm wheel transmission, but also smaller sized volume and appearance. Furthermore, S series worm gearbox has greater transmission ratio, and can be merged with numerous gearboxes and pace variators to meet up with the different needs.

two. Technological Info

Rated Energy      
                     0.18~22KW
Output Speed    
                     0.16~147r/min
Output Torque                                                                                                      90~4000N.m
Mounted Form Foot-mounted, flange mounted, shaft-mounted, torque arm mounted
Housing                                                                                                   Aluminum and Casting Iron

 3. Structure
S collection gearbox are accessible in the pursuing patterns:
(1) SY  Foot mounted helical worm gearbox with reliable shaft

(2) SAY  Helical worm gearbox with hollow shaft

(3) SAZY  Small flange mounted helical worm gearbox with hollow shaft

(four) SA (S,SF,SAF,SAZ)Y  Assemble users’ motor or unique motor, flange is necessary

(5) SFY  Flange mounted helical worm gearbox with solid shaft

(6) SAFY  Flange mounted helical worm gearbox with hollow shaft

(7) SATY  Torque arm mounted helical worm gearbox with hollow shaft

(8) S (SF,SA,SAF,SAZ) S  Shaft input helical worm gearbox

(nine) SA (S,SF,SAF,SAZ)RY  Combined helical worm gearbox

(ten) SA (S,SF,SAF,SAZ)SR  Shaft enter blended helical worm gearbox

4. In depth parameters

   Size 38 48 58 sixty eight 78 88 98
  Structure                                           S SA SF SAF SAT SAZ
   Input Electrical power(KW) .18-.seventy five .18-1.five .eighteen-3 .twenty five-five.5 .55-7.five .75-15 one.5-22
Ratio ten.27-152 11.46-244.74 10.78-196.21 eleven.fifty five-227.twenty 9.ninety six-241.09 11.eighty three-222 twelve.75-230.forty eight
Maximum torque(N.m) ninety a hundred and seventy 295 520 1270 2280 4000

5.Merchandise Pictures:

six.Our firm :
AOKMAN® was founded in 1982, which has more than 36 a long time in R & D and production of gearboxes, gears, shaft, motor and spare areas.
We can offer you the proper answer for uncountable purposes. Our merchandise are widely utilized in the ranges of metallurgical, metal, mining, pulp and paper, sugar and alcohol market place and different other kinds of devices with a strong existence in the global marketplace.
AOKMAN® has turn into a reliable provider, in a position to provide higher high quality gearboxes.With 36 many years expertise, we assure you the utmost trustworthiness and protection for the two merchandise and solutions.

7.Client going to:

8.Our Companies:

Pre-sale companies one. Decide on tools product.
two.Design and style and manufacture goods in accordance to clients’ special need.
3.Prepare specialized personalized for clients
Services for the duration of marketing 1.Pre-verify and accept merchandise forward of delivery.
2. Support clients to draft solving strategies.
After-sale services 1.Support consumers to get ready for the very first construction plan.
two. Train the very first-line operators.
three.Just take initiative to remove the difficulty rapidly.
4. Offer technological exchanging.

9.FAQ:
1.Q:What varieties of gearbox can you make for us?
A:Primary merchandise of our organization: UDL collection pace variator,RV collection worm equipment reducer, ATA series shaft mounted gearbox, X,B collection equipment reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, a lot more
than a single hundred versions and hundreds of specifications
two.Q:Can you make as for every customized drawing?
A: Sure, we offer custom-made provider for buyers.
three.Q:What is your conditions of payment ?
A: thirty% ept payment by T/T after signing the agreement.70% before shipping
4.Q:What is your MOQ?
A: 1 Set
ten.Speak to:
Tel: +86~571-8822571/88220973-53667898
Fax: 0086-571-88220971: +86~571-8822571/88220973-86571652
Mobile: +86-1873657180  
Handle: No.1394, Hanghai Road, HangZhou, China
Zip Code: 450016

If you have any demand for our merchandise you should really feel totally free to speak to me. 
 

/ The use of first equipment manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, authorized, or manufactured by the OEM. /

China  double enveloping worm gear manufacturers  Custom  China  in Manila Philippines  S Series 90 Degree Shaft Helical Worm Gearbox with top quality

Xhw75pg4 worm and worm gear animation shop China in Kolkata India Double Stage Worm Gearbox for Valve with top quality

Xhw75pg4  worm and worm gear animation  shop  China  in Kolkata India  Double Stage Worm Gearbox for Valve with top quality

We – EPG Group the most significant worm gearbox, couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Product: XHW75PG4 worm gearbox for valve
Double phase

Software
XHW element change worm gearboxes are used to dampers, ball valves, butterfly valves and also other 90° quarter switch valves. XHW element turn worm gear operator has range types of hand wheel for optional.
 
Functioning Surroundings

XHW component switch worm gearboxes are with excellent mechanical quality and continual working performance which utilize to deal with range local climate and temperature. We strive to develop RHW element flip worm gear operators to meet up with larger needs.
Enclosure: IP67
Wor ept Temperature: From -20ºC to 120ºC( -4ºF to 248ºF)
Portray: Silver grey (Customization)

 

Introduction
XHW series Component-flip Gearboxes use worm and worm wheel revolute pairs, with higher overall performance needle roller bearing assembled on both ends of the worm shaft. It assures the thrust need for the duration of rotation. It is in large mechanical performance withstands large torque, modest measurement with compact design and style, and it really is also effortless to function and has trustworthy self-loc ept purpose.
 
People
one.Precision casting ductile iron housing
two.Optional output torque, assortment up to 32000Nm
3.Large productive needle roller bearing
4.Substantial toughness steel input shaft
5.Stroke 0°- 90°( ±5°)
six.Compact structure
7.Grease crammed for more time daily life
eight.Adjustable stopper (±5°)
nine.Good seal
 
Link with valve
The flange connecting to valve is according to ENISO5210 or DIN3210(Customization)
 

Major Items
Worm gearbox, bevel gearbox, valve gear box, worm gear operator, worm equipment actuator, valve worm equipment, valve equipment operator, valve equipment actuator, valve actuator
Gear Operator, Valve Gearbox, Worm Gearbox, Gearbox, Velocity Reducer, Element-change Worm Gearbox, Worm Gearbox Supplier, Higher Top quality Worm Gearbox, Gearbox company
 

 

/ The use of original products manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the listed alternative parts contained herein are not sponsored, accredited, or created by the OEM. /

Xhw75pg4  worm and worm gear animation  shop  China  in Kolkata India  Double Stage Worm Gearbox for Valve with top quality

RV63 in Moradabad India double worm gear reducer factory China RV40 Double Reduction Gear Box with top quality

RV63  in Moradabad India   double worm gear reducer  factory  China RV40 Double Reduction Gear Box with top quality

We – EPG Team the biggest worm gearbox, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

NMRV worm gearbox motor 

NMRV sequence worm gear reducer:
Its composition,define and installation proportions as nicely as functionality are same with that of
Europe an goods,they are interchangeable,and the resources and machining process are sophisticated internationally.The product is highlighted by:
1.Lower sound and temperature increase.
two.Substantial bearing capacity,easy run and prolonged service daily life.
three.ompact composition,samll quantity,mild excess weight,gorgeous form and simple to put in.
4.Can operate continuously underneath server environment,and has a excellent dependability.

ept NMRV aluminum worm gearbox motor particulars:

Variety ept NMRV Worm Gear Pace Reducer /gearbox motor 
Model: NMRV25/30/ forty/ fifty/ 63/ seventy five/ ninety/110/one hundred thirty/150
Enter Electricity: .06KW,.09KW,.12KW,.18KW,.22KW,.25KW,.37KW,.55KW,.75KW,1.1KW,one.5KW,two.2KW,4KW,five.5KW,7.5KW ,11KW,15KW
IEC Flange 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5,
100B14,112B5,112B14 132B5,160B5
Ratio one: seven.5,10,15,20,twenty five,thirty,40,50,sixty,80,one hundred
 
 
 
Material 
Housing:  Die-Solid Aluminum Alloy for rv25-rv90 , die-solid forged iron for rv110 to rv150 
Worm Equipment-brass+cast iron 
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium metal-45#
Color: Blue/Silver Or other individuals if amount is large
Packing: Carton or plywood  Case
Promise time : one Yr besides apart from Man-manufactured destruction
Usages: Industrial Machine: Foodstuff Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft: output solid shaft or output hollow shaft 

FAQ
one, Q:what’s your MOQ for ac gearbox motor  ?
A: 1pc is ok for every variety electrical gear box  motor 

two, Q: What about your guarantee for your induction pace reducer motor ?
A: a single yr ,but except male-made destroyed

three, Q: which payment way you can accept ?
A: TT, western union .

four, Q: how about your payment way ?
A: one hundred%payment in advanced much less $5000 ,thirty% payment in innovative payment , 70% payment just before sending above $5000.

5, Q: how about your pac ept of pace reduction motor  ?
A: plywood situation ,if dimension is small  ,we will pack with pallet for much less one container 

6, Q: What data ought to be provided, if I buy electrical helical geared motor  from you ?
A: rated electricity,  ratio or output pace,sort ,voltage , mounting way , amount , if a lot more is much better.

/ The use of original equipment manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the shown substitute areas contained herein are not sponsored, authorized, or manufactured by the OEM. /

RV63  in Moradabad India   double worm gear reducer  factory  China RV40 Double Reduction Gear Box with top quality

China in Amsterdam Netherlands single vs double enveloping worm gear near me China Supplier Helical Gearbox Motor for Golf Trolley with top quality

China  in Amsterdam Netherlands   single vs double enveloping worm gear  near me  China Supplier Helical Gearbox Motor for Golf Trolley with top quality

We – EPG Team the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

China Provider helical gearbox motor for golf trolley
Our Gearbox has a lot of things for your selecting and we can create as per your drawing or sample to fulfill your special request
1. Big output torque
2. Secure, dependable, affordable and durable
3. Secure transmission, silent procedure
4. Higher carrying capability
five. High modularization style, may equip with various outer energy enter conveniently. Identical machine type may possibly equip with a variety of energy motor. It is simple to realize the mix and junction between every single equipment type
six. Transmission ratio: Fantastic division, broad scope. The blended device type may type extremely big transmission ratio, i. E. Output extremely reduced rotary speed.
7. Type of installation: The position to be put in is not constrained.
eight. Higher toughness, compact the box body of high energy solid iron, equipment and equipment shaft adapts the gasoline carbonization, quenching and good grinding procedure, consequently the bearing capability of unit volume is substantial.
nine. Prolonged daily life: Below the issue of proper kind decided on(such as picking ideal procedure parament ) standard procedure and servicing, the life if principal areas pace reducer(except donning parts)ought to not be significantly less than 20000 several hours. The donning parts include lubricating oil, oil seal and bearing.
10. Low sound: Simply because principal parts of speed reducer are processed, and examined critically, as a result the noise of velocity reducer is reduced.
eleven.Our equipment box have arrived at the ept global stage, can change the identical sort of merchandise imported.

Business Information

HangZhou ept ept Co., Ltd. is a specialized provider of a entire range of chains, sprockets, gears, equipment racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our sincerity in providing greatest support to our customers, comprehending of your wants and overriding feeling of duty towards filling purchasing needs, we have obtained the ept of customers globally. Obtaining accrued treasured experience in cooperating with overseas consumers, our products are selling well in the American, European, South American and Asian marketplaces.Our goods are manufactured by contemporary computerized machinery and tools. Meanwhile, our merchandise are manufactured in accordance to higher good quality requirements, and complying with the intercontinental superior normal conditions.

With many years’ experience in this line, we will be trusted by our advantages in competitive cost, one-time shipping and delivery, prompt reaction, on-hand engineering assistance and very good right after-revenue providers.

In addition, all our creation processes are in compliance with ISO9001 standards. We also can layout and make non-normal goods to fulfill customers’ special needs. Good quality and credit are the bases that make a company alive. We will give ideal companies and large high quality items with all sincerity. If you require any info or samples, please speak to us and you will have our soon reply.

/ The use of original equipment manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our firm and the listed alternative components contained herein are not sponsored, accepted, or created by the OEM. /

China  in Amsterdam Netherlands   single vs double enveloping worm gear  near me  China Supplier Helical Gearbox Motor for Golf Trolley with top quality