Tag Archives: worm drive screw

China Professional Best hand crank worm drive linear actuator, Hand Worked Screw Jack Lift wholesaler

FeaturesBest hand crank worm drive linear actuator, Hand Worked Screw Jack Lift The longer the stroke, the less load it can lift, considering the compression limit of the screw. It can powered by motor, belt or handwheel. Can be mounted uprightly, horizontally or inverted for different applications with different screw end. It is stable, accurate and space saving.
A manual screw jack is consist of a hand wheel and a complete worm gear screw jack. The screw jack makes it possible to transform the rotary motion provided by a handwheel, into linear motion that allows push or pull vertical lifting and horizontal positioning. They can be used to lift, pull, move, or align any type of load with perfect synchronism, which is difficult to achieve with other types of actuators.They can be applied either with vertical mountings facingup or down, or with horizontal mountings.
All screw jacks can be moved manually via a handwheel. To do this, 1 input shaft shall be available on the screw jack for the connection of the handwheel. Manual screw jacks are available in load capacity 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 3 ton, 5 ton, 10 ton, 15 ton and 20 ton, heavy load larger than 20 ton capacity, manual operated screw jack is not recommended. They are ideal solutions for applications where electricity or power generators is inconvenient or dangerous, or in case of power failure, light weight, low duty cycle, low speed, low target cost, short stroke, and intermittent positioning applications. If must be not backdriving, a self locking machine screw jack with handwheel is the best choice. If high speed ball screw jack with handwheel, locking mechanisms need to be considered. If a brake motor is used, the brake shall be un-clamped firstly, so to allow for movement.

Cast Iron Handwheel Diameter 125mm, 160mm, 200mm, 250mm, 300mm and 400mm, larger diameter handwheel is available, please consult CZPT Industry. The recommended screw jack with 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 5 ton, 10 ton, 15 ton, 20 ton capacities are available in matching cast iron handwheel for hand-operation application.

Aluminum Handwheel with Folding Handle Diameter 125mm, 160mm and 200mm. The recommend screw jack 0.25 ton, 0.5 ton, 1 ton, 2 ton, 2.5 ton, 5 ton capacities are available in matching aluminum handwheel for hand-operation application.

In order to precise position display of the travel length, the worm shaft adds a digital position indicator which measures the rotation and display a corresponding position in a counter window. There are 3 sizes position indicators: 04 series position indicator 4 numbers with 14mm hollow shaft, 09 series position indicator 5 numbers with 20mm hollow shaft, 10 series position indicator 5 numbers with 25mm or 30mm hollow shaft. Note: inapplicable motorized screw jacks.

Miniature Hand Wheel Manual Screw Jack with Clevis End, or Top Plate End
Mini compact CZPT screw jack 2.5 KN capacity, translating screw configuration, upright mount, gear ratios 1/5 (one rpm input travel length 0.8 mm), 14mm diameter lifting screw and 4mm screw leads(pitch) as standard, stroke 65mm, clevis end, or top plate, 2 input shafts, attached handwheels 125mm diameter.
Hand Operated Screw Jack 50 kN
Cubic manual screw jacks load capacity 50 kN, self locking trapezoidal screw diameter 40mm, pitch 7mm, upright mount, translating screw type, stroke 500mm, ratio 7:1 (one rpm input travel length 1mm), threads end attaches rod end bearing, double input shafts, attached protect pipe, and hand wheels diameter 300 mm.

5 ton stainless steel hand crank screw jack for lifting tables. Stainless steel worm gear screw jack 5 ton capacity, translating screw configuration, inverted mount, gear ratios 1/12 (one rpm input travel length 0.59 mm), 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 1200mm, clevis end fitting, right input shaft and left motor flange, attached handwheel 200mm dia., and electric motor with motor flange.

Manual Operated Worm Gear Jack Screw 5tonnes

Hand Worm Screw Lift Jacks 2.5 tonnes

Manual Screw Jack 5 ton
Crank screw jacks with 5 ton capacity, anti-rotation keyed screw configuration, Factory supply machinery parts flexible chain coupling drive shaft coupling with low cost upright mount, gear ratios 1/7 (one rpm input travel length 1 mm), 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 350mm, thread end screwed into rod end(set screws fix), right shaft and left shaft, attached handwheels 300mm diameter, rod end bearings, protective pipe and digital counters.

2.5 ton hand operated screw jack lift for industrial vintage cast iron crank dining crank table base. Hand wheel screw jack with 2.5 ton capacity, upright installation, translating screw configuration, gear ratios 1/6 (one rpm input travel length 2 mm), 30mm diameter CZPT screw and 12mm(2P) screw leads(pitch) as standard, stroke 300mm(12″), top plate(flange) end fittings, 2 input shafts, attached handwheel 200mm(8″) or 300mm(12″) diameter, couplings and drive shafts.

2.5ton Stainless Steel Manual Operate Screw Jack with Traveling Nut for Hand Crank Lift Systems. Stainless Steel Machine Screw Jack 2.5 ton capacity, rotating screw configuration, upright mount, gear ratios 1/6 (one rpm input travel length 1 mm), 30mm diameter lifting screw and 6mm screw leads(pitch) as standard, stroke 500mm, plain end fitting, 2 input shafts, attached handwheels 200mm dia., and copper travel nut.

10 ton hand wheel worm gear screw jack for screw jacks platform lift. Hand-operated machine screw jack (or linear actuator) type device 10 tons capacity, upright installation, translating screw configuration, gear ratios 1/8 (one rpm input travel length 1.5 mm), 58mm diameter machine screw and 12mm screw leads(pitch) as standard, stroke 500mm, top plate(flange) end fitting, 2 input shafts, attached handwheels 300mm(12″) diameter.

5ton hand operated lifting screw jacks for mechanical hand crank lift table. Manual machine screw jack 5 tons capacity, translating screw configuration, upright mount, gear ratios 1/6 (one rpm input travel length 1.167 mm), 40mm diameter lifting screw and 7mm screw leads(pitch) as standard, stroke 150mm, clevis end fitting, 2 input shafts, attached handwheels 300mm(12″) diameter, protect tube and bellows boots.

1 Ton Manual Worm Gear Screw Jack for Llifting

Mechanical screw jacks can be operated by manually or by electrical motor. More than 1 screw jacks can be connected together to move simultaneously.Mechanical Lifting and Pulling Screw Jacks These models are used instead of hydraulic jacks where pushing and pulling is neeed between heavy components espacially in industrial building construction works, industrial machinery installations, bridge constructions.Working principle of screw jacksTravelling Screw Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, worm gear and gear housing. Worm screw is rotated manually or by motor. Worm gear is rotated by worm screw. The lifting screw moves through the rotating worm gear. If free load connected to screw jack, screw will rotate circularly and move up ande down. If it is constantly load, screw will move vertical ways linearly. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.Anti-rotation Keyed Screw Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, worm gear and gear housing. Worm screw is rotated manually or by motor. Worm gear is rotated by worm screw. The lifting screw moves through the rotating worm gear. In order to prevent/block screw’s rotation, wedge should be opened to screw. By this way, the screw can just move vertically. Screw connection type’s importance will be put away. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.Travelling Nut Type: Main components of screw jacks are; trapezoidal lifting screw, worm screw, lifting nut and gear housing. Worm screw is rotated manually or by motor. With the rotation of the gear, the screw that is inside the screw jack only makes its rotation about its axis. The flange, which is produced from the bronze material on the screw shaft moves linearly upwards or downwards. One of the purposes of using such systems is the lack of ducting or storage for the movement of the screw used in the screw type and screw type cockp. Although screw jack doesn’t lift down from bottom. The linear motion speed of lifting screw depends on thread size and rotation ratio of worm gears.
Manual screw jack (hand wheel screw jacks, hand crank screw jacks, hand operated screw jacks) is driven by a hand wheel or crank or handle. The best advantage is suitable for heavy load, low speed, low service frequency. Our manual screw jacks have different configuration form and assembly type,and the lifting height can highly customized according to users’ demand, low cost and easy operation.
Our standard jacks use Trapezoidal screw and have self-locking function which is very safe for manually operated by hand. We have different models for your selection, our jtw series machine screw jack is the most cost-effective selection for this application. You can also use digital position indicators if you need more precise position display. It can measure the rotations of the input shaft and display the corresponding position in the digital counter window. The display value per input shaft revolution is variable and is achieved through a series of gear reductions configured to accommodate different worm gear screw jack ratios, screw pitch, and travel length.
Packaging & ShippingShipping:1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.2. Air freight: airport to airport, price terms EXW, CRF etc.3. Air courier: DHL, FEDEX, UPS, Hadley Wall Mount Cable Attachment Station With Adjustable Pulley System For Home Gyms Equipment For Sale TNT door to door shipment, price terms DDU, CPT etc.Packing: 100% standard exporting plywood cases.
Note: International Exporting Standard Wooden Material with Free Fumigation.

Our Advantages* One of the biggest orders with 1750 units screw jacks.* Standard products with 2D Drawings(DXF, DWG, PDF) and 3D CAD Model(STEP).* 100% quality assured with double quality inspections. Original Inspection Reports, Operation Manual, and Book Catalogue are put into the packages. * 100% safety transportation with strong standard export plywood cases materials (free fumigation). * International standard materials for all standard products. * Custom design available, OEM service available, Free engineering advice and Customer label available.

Finished Projects1. Theatrical solutions stage and orchestra platform lifts projects. Customers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 2. Hydroelectric power station projects and water conservancy projects. Customers are from Vietnam, Australia, Malaysia, Belgium, United States and United Kingdom. 3. Aircraft maintenance platforms and docking systems projects. Customers are from Singapore. 4. Solar panel tracking system projects. Customers are from Spain, India and Canada. 5. Bolted steel storage tanks and silos lifting solutions. Customers are from South Africa, United States, Mexico and Vietnam. 6. Dish antenna elevation and azimuth positioning projects. Customers are from Singapore, Malaysia and United States. 7. Railway wagon projects. Customers are from South Africa. 8. Beverage can production lines. Customers are from Netherlands, United States, Thailand and Indonesia. 9. Steel factories production lines. Customers are from United States. 10. Continuous PU sandwich panel production lines. Customers are from Thailand and United Kingdom.
Other Products* Manual Screw Jacks.* Electric Screw Jacks.* Worm Gear Screw Jacks Series.* Bevel Gear Screw Jack Series.* Electric Cylinders Series.* Spiral Bevel Gearboxes Series.* Lifting Systems and Accessories.* Electric Linear Actuators Series.* Geared Motor and Gear Reducers Series.

Clients Countries1. American Countries: United States, Mexico, Canada, Chile.2. European Countries: Germany, France, United Kingdom, Italy, Spain, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Georgia, Slovenia.3. Asian Countries: Malaysia, Indonesia, Singapore, Philippines, Vietnam, Thailand, India, Israel.4. Oceanian Countries: Australia, New Zealand.5. African Countries: South Africa, Egypt.

Contact InformationJACTON INDUSTRY Co., Ltd (VAT No.: 9144190007026567X3) is 1 of the leading companies in the field of Screw Jacks(Mechanical Actuators), Bevel Gearboxes, Lifting Systems, Linear Actuators, Gearmotors and Speed Reducers. We are an audited professional manufacturer and supplier by SGS (Serial NO.: QIP-ASI192186) and BV (Serial NO.: MIC-ASR257162) organizations. We have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, and consistently provide the customers with the best engineered solution for precision linear actuation, power transmission and mechanical jacking systems. CZPT Industry guarantees quality, reliability, performance and value for today′s demanding industrial applications.

FAQ
1. What type of payment methods do you accept?
We accept Wire transfer, Credit Card, Paypal, Alibaba Trade Assurance order, Western Union and L/C etc.
2. Can I get 1 sample to test?
Yes, sample can be at a normal price and welcomed. The transport fees are at your account.
3. How about the quality of your product?
Jacton industry is only focus on the field of Screw Jacks(Mechanical Actuators), Bevel Gearboxes, Lifting Systems, Linear Actuators, Gearmotors and Speed Reducers. 4. OEM/ODM Accepted?
Yes, Please send you new product drawings or sample to us if you have, and we can custom-made as your required. We will also provide professional advices of the products to make the design to be maximize the performance.
5. If you can not find the product on our website,how do you do?
Please send us inquiry with product pictures and drawings by email or other ways you prefer, we’ll check if we could produce.
6. Can I trust you?
Absolutely yes. Samples could be provided to test firstly, and we can use Alibaba trade assurance service to do business to guarantee both the seller and buyer’s benefit, and we are golden supplier for years.
7. What’s our products warranty?One year quality guarantee for the products from your purchase date, Transmisson 6R80 valve body transmission gearbox Torque converter planet oil pump solenoid F150 AL3Z-7G276 TCU TCM except the human damage.

How to Calculate the Diameter of a Worm Gear

worm shaft
In this article, we will discuss the characteristics of the Duplex, Single-throated, and Undercut worm gears and the analysis of worm shaft deflection. Besides that, we will explore how the diameter of a worm gear is calculated. If you have any doubt about the function of a worm gear, you can refer to the table below. Also, keep in mind that a worm gear has several important parameters which determine its working.

Duplex worm gear

A duplex worm gear set is distinguished by its ability to maintain precise angles and high gear ratios. The backlash of the gearing can be readjusted several times. The axial position of the worm shaft can be determined by adjusting screws on the housing cover. This feature allows for low backlash engagement of the worm tooth pitch with the worm gear. This feature is especially beneficial when backlash is a critical factor when selecting gears.
The standard worm gear shaft requires less lubrication than its dual counterpart. Worm gears are difficult to lubricate because they are sliding rather than rotating. They also have fewer moving parts and fewer points of failure. The disadvantage of a worm gear is that you cannot reverse the direction of power due to friction between the worm and the wheel. Because of this, they are best used in machines that operate at low speeds.
Worm wheels have teeth that form a helix. This helix produces axial thrust forces, depending on the hand of the helix and the direction of rotation. To handle these forces, the worms should be mounted securely using dowel pins, step shafts, and dowel pins. To prevent the worm from shifting, the worm wheel axis must be aligned with the center of the worm wheel’s face width.
The backlash of the CZPT duplex worm gear is adjustable. By shifting the worm axially, the section of the worm with the desired tooth thickness is in contact with the wheel. As a result, the backlash is adjustable. Worm gears are an excellent choice for rotary tables, high-precision reversing applications, and ultra-low-backlash gearboxes. Axial shift backlash is a major advantage of duplex worm gears, and this feature translates into a simple and fast assembly process.
When choosing a gear set, the size and lubrication process will be crucial. If you’re not careful, you might end up with a damaged gear or one with improper backlash. Luckily, there are some simple ways to maintain the proper tooth contact and backlash of your worm gears, ensuring long-term reliability and performance. As with any gear set, proper lubrication will ensure your worm gears last for years to come.
worm shaft

Single-throated worm gear

Worm gears mesh by sliding and rolling motions, but sliding contact dominates at high reduction ratios. Worm gears’ efficiency is limited by the friction and heat generated during sliding, so lubrication is necessary to maintain optimal efficiency. The worm and gear are usually made of dissimilar metals, such as phosphor-bronze or hardened steel. MC nylon, a synthetic engineering plastic, is often used for the shaft.
Worm gears are highly efficient in transmission of power and are adaptable to various types of machinery and devices. Their low output speed and high torque make them a popular choice for power transmission. A single-throated worm gear is easy to assemble and lock. A double-throated worm gear requires two shafts, one for each worm gear. Both styles are efficient in high-torque applications.
Worm gears are widely used in power transmission applications because of their low speed and compact design. A numerical model was developed to calculate the quasi-static load sharing between gears and mating surfaces. The influence coefficient method allows fast computing of the deformation of the gear surface and local contact of the mating surfaces. The resultant analysis shows that a single-throated worm gear can reduce the amount of energy required to drive an electric motor.
In addition to the wear caused by friction, a worm wheel can experience additional wear. Because the worm wheel is softer than the worm, most of the wear occurs on the wheel. In fact, the number of teeth on a worm wheel should not match its thread count. A single-throated worm gear shaft can increase the efficiency of a machine by as much as 35%. In addition, it can lower the cost of running.
A worm gear is used when the diametrical pitch of the worm wheel and worm gear are the same. If the diametrical pitch of both gears is the same, the two worms will mesh properly. In addition, the worm wheel and worm will be attached to each other with a set screw. This screw is inserted into the hub and then secured with a locknut.

Undercut worm gear

Undercut worm gears have a cylindrical shaft, and their teeth are shaped in an evolution-like pattern. Worms are made of a hardened cemented metal, 16MnCr5. The number of gear teeth is determined by the pressure angle at the zero gearing correction. The teeth are convex in normal and centre-line sections. The diameter of the worm is determined by the worm’s tangential profile, d1. Undercut worm gears are used when the number of teeth in the cylinder is large, and when the shaft is rigid enough to resist excessive load.
The center-line distance of the worm gears is the distance from the worm centre to the outer diameter. This distance affects the worm’s deflection and its safety. Enter a specific value for the bearing distance. Then, the software proposes a range of suitable solutions based on the number of teeth and the module. The table of solutions contains various options, and the selected variant is transferred to the main calculation.
A pressure-angle-angle-compensated worm can be manufactured using single-pointed lathe tools or end mills. The worm’s diameter and depth are influenced by the cutter used. In addition, the diameter of the grinding wheel determines the profile of the worm. If the worm is cut too deep, it will result in undercutting. Despite the undercutting risk, the design of worm gearing is flexible and allows considerable freedom.
The reduction ratio of a worm gear is massive. With only a little effort, the worm gear can significantly reduce speed and torque. In contrast, conventional gear sets need to make multiple reductions to get the same reduction level. Worm gears also have several disadvantages. Worm gears can’t reverse the direction of power because the friction between the worm and the wheel makes this impossible. The worm gear can’t reverse the direction of power, but the worm moves from one direction to another.
The process of undercutting is closely related to the profile of the worm. The worm’s profile will vary depending on the worm diameter, lead angle, and grinding wheel diameter. The worm’s profile will change if the generating process has removed material from the tooth base. A small undercut reduces tooth strength and reduces contact. For smaller gears, a minimum of 14-1/2degPA gears should be used.
worm shaft

Analysis of worm shaft deflection

To analyze the worm shaft deflection, we first derived its maximum deflection value. The deflection is calculated using the Euler-Bernoulli method and Timoshenko shear deformation. Then, we calculated the moment of inertia and the area of the transverse section using CAD software. In our analysis, we used the results of the test to compare the resulting parameters with the theoretical ones.
We can use the resulting centre-line distance and worm gear tooth profiles to calculate the required worm deflection. Using these values, we can use the worm gear deflection analysis to ensure the correct bearing size and worm gear teeth. Once we have these values, we can transfer them to the main calculation. Then, we can calculate the worm deflection and its safety. Then, we enter the values into the appropriate tables, and the resulting solutions are automatically transferred into the main calculation. However, we have to keep in mind that the deflection value will not be considered safe if it is larger than the worm gear’s outer diameter.
We use a four-stage process for investigating worm shaft deflection. We first apply the finite element method to compute the deflection and compare the simulation results with the experimentally tested worm shafts. Finally, we perform parameter studies with 15 worm gear toothings without considering the shaft geometry. This step is the first of four stages of the investigation. Once we have calculated the deflection, we can use the simulation results to determine the parameters needed to optimize the design.
Using a calculation system to calculate worm shaft deflection, we can determine the efficiency of worm gears. There are several parameters to optimize gearing efficiency, including material and geometry, and lubricant. In addition, we can reduce the bearing losses, which are caused by bearing failures. We can also identify the supporting method for the worm shafts in the options menu. The theoretical section provides further information.

China Professional Best hand crank worm drive linear actuator, Hand Worked Screw Jack Lift  wholesaler China Professional Best hand crank worm drive linear actuator, Hand Worked Screw Jack Lift  wholesaler

in Balashikha Russian Federation sales price shop near me near me shop factory supplier Worm Gear Reducer 040 Gearbox Aluminium Motor Gear Box Drive Small Speed DC Flange Screw Jacks Wheel Wpa Wpx Plastic Double Reducer Machinery Motor manufacturer best Cost Custom Cheap wholesaler

  in Balashikha Russian Federation  sales   price   shop   near me   near me shop   factory   supplier Worm Gear Reducer 040 Gearbox Aluminium Motor Gear Box Drive Small Speed DC Flange Screw Jacks Wheel Wpa Wpx Plastic Double Reducer Machinery Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Our specialists and engineers have 23 years of Experience in the Bearing Business. “We are always serving our buyers with our ideal items.” Our products are produced by present day computerized equipment and gear.

Worm Equipment EPT 040 EPT Aluminium EPT EPT box EPT modest pace dc flange screw jacks wheel WPA WPX plastic EPT EPT EPTry motor

one) EPT alloy die-casted EPT
two) Compact structure saves mounting place
three) Highly precise
4) Operates EPT and backward
five) Large overload capacity
six) Steady EPT with diminished vibration and sounds

Model: NMRV040
Ratio: 7.5,10,fifteen,twenty,25,30,forty,50, sixty,
Color: Depend on customer/Blue/ Silver White

EPT:

EPT — EPT
Worm Equipment–Cooper(ten-3 #)
Worm Shaft–20CrMnTi with carburizing and quenching, floor hardness is fifty six-62HRC
Shaft-chromium steel-forty five#
EPT: NSK or EPT higher quality bearing
OIL Seal: EPT lip/NOKCFWTCSNAK
Lubricant: Synthetic amp Mineral
Input EPT: 0.06kw,.09kw,
Usages: In EPT EPT: Meals stuff, Ceramics, chemical, as nicely as EPT, printing, dyeing, woodworking, EPT and plastics…..
MOQ: 10pcs
Samples Time: 1-3 days
OEM Accepted: Can set buyer logo
Certification : TUV,ISO9001

firm info


  in Balashikha Russian Federation  sales   price   shop   near me   near me shop   factory   supplier Worm Gear Reducer 040 Gearbox Aluminium Motor Gear Box Drive Small Speed DC Flange Screw Jacks Wheel Wpa Wpx Plastic Double Reducer Machinery Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Balashikha Russian Federation  sales   price   shop   near me   near me shop   factory   supplier Worm Gear Reducer 040 Gearbox Aluminium Motor Gear Box Drive Small Speed DC Flange Screw Jacks Wheel Wpa Wpx Plastic Double Reducer Machinery Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Gearbox worm gear drive uses wholesaler China in Belfast United Kingdom Hydraulic Jack Motor Gear Jacket Heavy Duty Gearbox Jack Motor Gear Screw Gearbox for Double Screw Twin Screw Extruder Gearbox with top quality

Gearbox  worm gear drive uses  wholesaler  China  in Belfast United Kingdom  Hydraulic Jack Motor Gear Jacket Heavy Duty Gearbox Jack Motor Gear Screw Gearbox for Double Screw Twin Screw Extruder Gearbox with top quality

We – EPG Team the biggest worm gearbox, couplings and gears manufacturing unit in China with 5 diverse branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Precision Worm Gearboxes and Worm-Wheel Sets grove gear ironman grg PersonnelOur worm gear for sale revenue persons are properly skilled to accommodate your requests and converse English for your comfort.

gearbox hydraulic jack motor gear jacket hefty responsibility gearbox jack motor gear screw gearbox for double screw twin screw extruder gearbox

Business information 

Proven in 1985, EPT  TRANSMISSION MACHINERY CO., LTD is a large and new technological innovation enterprise engaging in analysis, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for reducer & velocity variator, a single of the director member of China Reducer Affiliation of China Standard Machinery.
It covers far more than 40,000 square meters, has more than four hundred workers , 20% of whom are professionals, outfitted with much more than 300 sets the most EPT d correct numerical control equipment, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming gear grinding machine to enhance good quality.
set up much more than 30 nationwide sales branches to provide our customers in time and completely.
Our goods also exported to a lot more than 30 countries main in Europe, Asia  America, and Africa, with higher track record.

Top quality manage

PacEPT

Associated GEARBOX varieties

Precision Planetary gearbox Robot RV gearbox speed reducer
Customized made Non-stHangZhourd Gearbox UDL Collection Variator
PYZ Sequence Helical Tooth Shaft Mounted Reducer 8000 Collection Cycloidal Reducer
SLT Series  Spiral Bevel Gearbox SLSWL Collection Worm Screw Jack
SLP Sequence Planetary Reducer SLH/SLB Collection Large Power Reducer
NMRV Sequence Worm Reducer BKM Sequence Helical-hypoid Reducer
SLRC Series Helical Reducer SLSMR Sequence Shaft Mounted Reducer
SLXG Collection Shaft Mounted Reducer X/B Sequence Cycloidal Reducer
SLR/SLF/SLK/SLS Series Helical Reducer AC/DC Motor

Principal merchandise listing: 16 series incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SLF sequence challenging tooth flank gear reducer , SLRC series aluminium case helical gear reducers,SLHSLB sequence higher power speed reducer, SLP series planetary pace reducer, X/B series cycloidal reducer, SLXG series shaft-mounted gear box, SLSWL series worm screw jack, SLT sequence helical cone equipment box, entirely more than 10,000 ratios, various specification make us at the head of domestic transmission EPT , widely serve the EPT al transmission subject of light & hefty EPT such as: beer & beverage, mining machine, foods pacEPT , textile printing, rubber & plastic materials, petrocheEPT al EPT , jack-up transportation, pharmacy & procedure hides, environmental security gear.

Certificate 

FAQ

one.Payment Time period: TT, L/C

2.Delivery time: about  30 times from get payment. 

three.We accept custom-made merchandise as for each your specific prerequisite.

four.XiHu (West Lake) Dis.Hu (West Lake) Dis.traces for the Variety:Normally we can select 1 device which is suitable for you with some informations from you,this kind of as ratio/motor velocity/mounting dimension/ out torque and so on. 

five.If the minimum order quantity is in excessive of $10000, there are preferential.
 

Q1: What details must I inform you to verify the item?

A:Design/Dimension, Transmission Ratio, Shaft directions & Get quantity.

Q2: What can i do if I will not know which a single I want?

A:Dont fret, Send as a lot info as you can, our staff will aid you find the right 1 you are looEPT for.

Q3: What is your solution guarantee period of time?

A:We offer 1 calendar year guarantee considering that the vessel departure date still left China.

 

Q4: Are you EPT firm or manufacturer ?

A: We are manufacturing unit.

 

Q5: How long is your delivery time?

A: Normally it is 5-ten times if the goods are in inventory. or it is fifteen-twenty times if the merchandise are not in stock, it is in accordance to amount.

 

Q6: Do you offer samples ? is it free or additional ?

A: Yes, we could offer the sample for free cost but do not pay out the expense of freight.

 

Q7: What is your conditions of payment ?

A: Payment=1000USD, thirty% T/T in EPT ,equilibrium before shippment.

 

If you have another question, pls really feel free of charge to make contact with us as under:

Speak to Us

 

/ The use of first gear manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our company and the detailed substitute components contained herein are not sponsored, accredited, or made by the OEM. /

Gearbox  worm gear drive uses  wholesaler  China  in Belfast United Kingdom  Hydraulic Jack Motor Gear Jacket Heavy Duty Gearbox Jack Motor Gear Screw Gearbox for Double Screw Twin Screw Extruder Gearbox with top quality